Troubleshooting - Zoom MULTISTOMP MS-60B Operation Manual

The unit will not turn ON
to the INPUT jack to start the unit.
No sound or very low volume
Adjust the levels of the effects being used (→P8).
There is a lot of noise
30

Troubleshooting

→P6).
→P19).
→P6).
An effect is not working
"DSP Full!" appears on the effect graphic. In
this case, the effect is bypassed (→P9).
Batteries lose their charge quickly
batteries. Alkaline batteries should provide
about 7 hours of continuous operation.
Set the type of battery being used to enable
the remaining charge to be shown more
accurately (→P20).
they might be used more quickly in cold.
→P6).