Kyocera Sprint DuraXT User Manual page 130

6. When printing is finished, press
7. Press YES (left softkey). Follow the instructions on the display to unplug the USB cable
from the phone.
To print pictures using a Bluetooth-enabled printer:
1. Press > Tools > Bluetooth > Trusted Devices.
2. Select a printer from the Trusted Devices list and press PRINT... (left softkey) > In
Phone or On Memory Card.
3. Select the check box for each picture you wish to print and press CONTINUE (left
softkey).
– or –
1. Press > Photos & Videos > My Photos & Videos > In Phone or On Memory Card.
2. Highlight a picture to print and press OPTIONS (right softkey) > Print > Bluetooth.

Press OPTIONS (right softkey) > Select Multiple to select multiple pictures.
3. Select the printer and press
Note: You may not be able to print pictures that you cannot display on your phone.
4. Set the print settings using your navigation key.

Type: You can select the print mode from Prints or Index.

Copies: You can set the number of copies from Single, Doubles, or Manual (up to
99 per picture).
 Size: You can set the print size from 4"x6", 5"x7", or Letter. (Print sizes may vary
according to the type of printer you have.)

Date: You can imprint the date on your pictures. Select On or Off. (Date stamping
may not be available depending on the type of printer you have.)

Border: You can choose whether to print the pictures with or without a border.
Select On or Off.

Caption: You can choose whether to print the pictures with or without text captions
such as the date captured (if available) and serial numbers. Select On or Off.
5. When you have finished selecting the print settings, press PRINT (left softkey).
Note: Before using the Bluetooth printing feature, make sure your phone's battery is fully
charged.
Camera
.
.
121