Table of Contents
Advertisement
Chapter 6 Bluetooth Mode
6.1 Shift to Bluetooth mode
Repeatedly press SOURCE until <Bluetooth> is showing up.
Note:
while enter Bluetooth mode, an
waiting for pairing with a new Bluetooth device or connecting to a paired Bluetooth device.
6.2 Pairing with Bluetooth devices
Pairing occurs when two Bluetooth devices communicate with each other and establish a
connection. A record of information about this connection is then stored in the memory of each
device. Once you pair a device with the radio, you should not have to pair it again.
To perform pairing with a Bluetooth device
1.
Turn on your Bluetooth device.
2.
Set your Bluetooth device to "discover" the radio, then check the Bluetooth device
list.
From the Bluetooth device list, select the device named "KADABBTTBLA".
3.
4.
If your device asks for a passkey, enter digits 0000 (four zeros) and press OK.
Some devices also ask you to accept the connection.
Your Bluetooth device indicates when pairing is complete. The radio indicates pairing is complete
when the
remains steadily on.
icon
Press SCAN/
to the previous song, press
press
/PRESET to the next song.
To pair additional devices
Note: when you have paired your Internet radio with a Bluetooth device and want to
use another device instead, please set your first Bluetooth device which is in the effective
communication range to "undiscover".
icon showing up and blinking slowly, it means radio is
/INFO to play/pause the currently selected song,
Advertisement
Table of Contents
