Manual Tune; Prune Invalid; Drc (Dynamic Range Control) - Kogan KADABBTTBLA User Manual

3.4 Manual Tune

1. Press MENU  < Manual tune >, and then press SCROLL to confirm.
2. Turn SCROLL to cycle through the channels and press SCROLL to select the current
channel.

Note: If there is a multiplex corresponding to this channel and frequency, then the display
will show a tuning meter with the signal strength and the multiplex name after a few
seconds.
3. Press SCROLL again to exit this order.

3.5 Prune Invalid

1. Press MENU  < Prune invalid >, and then press SCROLL to confirm.
2. Turn SCROLL to 'YES', then press SCROLL to confirm.

3.6 DRC (Dynamic Range Control)

You can set the level of the compression of stations to eliminate the differences in dynamic
range or sound level between radio stations.

Note: a. Set DRC to off indicates no compression.
b. set DRC to low indicates little compression.
c. set DRC to high shows maximum compression.
1.
Press MENU  < DRC >, and then press SCROLL to confirm.
2.
Turn SCROLL to your selecting option, then press SCROLL to confirm.