Table of Contents
Advertisement
3. If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA code
and display the password entry screen as follows:
Turn SCROLL to cycle through the alphanumeric character list, press SCROLL to select
an appointed character.
Note: WEP/WPA pass codes are case-sensitive.
If a wrong character is being input while entering your password, select '
' to delete that character.
Note: a.>
b.> The method of select
to select
c.>
Select
d.>
Radio will automatically save the WEP/WPA you've input, so you will not need to re-enter
these codes.
e.>
After selected the final character of your password, turn SCROLL to
SCROLL to confirm.
= Backspace.
,
, then turn SELECT to select
will return to previous track.
Note: If your network is not configured to request a
password (WEP/WPA), radio will connect to the
network and display as left picture:
or
, while cursor point to
or
, turn SCROLL
in turn.
, then press
Advertisement
Table of Contents
