Video Recording; How To Use The Self-Timer And Continuous Shooting Functions; Taking Pictures; Audio Recording - Kogan KADVCAAA30A User Manual

Hide thumbs Also See for KADVCAAA30A:
Table of Contents

Advertisement

Video recording

1: Turn on the camera, set the video camera to video recording mode
2: Press [shutter] to start recording the video and [right] key to pause; press [right] key again to resume the video recording.
3: Press [shutter] key again to stop the recording. In the event of the memory card becoming full, the camera will automatically stop
the recording.

How to use the self-timer and continuous shooting functions

Use self-timer to set the delayed time between the pressing of the shutter and shooting the picture.
1: Turn on the video camera, set the camera to self-timer mode.
2: Press [menu] key to show the picture shooting menu.
3: Press [up] or [down] key to select [shooting mode], then, press [right] or [OK] key to enter the sub-menu:
Turn off: normal shooting without time delay.
  Self-timer 2 seconds: the release of shutter is delayed by 2 seconds.
  Self-timer 10 seconds: the release of shutter is delayed by 10 seconds.
  Continuous shooting: press the shutter once, three pictures will be taken continuously.
4: Press [up] or [down] key to select the shooting mode you want.
5: Press [up] key to confirm the setting and press [menu] key to escape.
6: Press [shutter] key to take picture.
● You can directly press [right] key to change the shooting mode of the video camera. Each time you press [right] key, the
shooting mode of the camera will change for once.

Taking pictures

1: Turn on the video camera.
2: Set the video camera to picture shooting mode (
3: Take the image you need through the LCD screen, press [shutter] key to take picture.
● After each shooting, the number of shooting shown on the LCD screen will reduce by 1 automatically. For instance, if the
number shown on the LCD screen is 18, then, after next shooting, the number shown will be 17. If the memory of the memory
card is full, then "insufficient memory" will be shown on the LCD screen.
● Do not shut out the lens with finger or wrist belt when shooting.
● In case the light is insufficient, press [LED switch] key to turn on the LED light.

Audio recording

1: Turn on the camera, set the video camera to audio recording mode
2: Press [shutter] to start recording the audio and [right] key to pause; press [right] key again to resume the audio recording.
3: Press [shutter] key again to stop the recording. In case the memory of the memory card is full, the camera will automatically stop
the recording.
● There is no menu for audio recording.
).
.
8

Advertisement

Table of Contents
loading

Table of Contents