Preparations Before Taking Pictures; Installing The Batteries; Inserting The Memory Card; Formatting The Memory Card - Kogan KADVCAAA30A User Manual

Table of Contents

2 Preparations before taking pictures

1: Open the battery cover.

2: Install three No.7 alkaline batteries in the battery cabin; pay attention to the positive and negative ends of the batteries.

3: After installing the batteries, close the battery cover.

There is no built-in memory in this camera and no pictures and image files can be saved. If you want to shoot the files for storing,

please use SD or MMC card. Before inserting or taking out the card, please turn the camera off first.

Before inserting the card, please ensure the memory card direction is correct. If you feel there is resistance, please do not forcibly

insert the card. The memory card is provided with a write protection switch to avoid accidental deletion of the data. Therefore, if you

want to save or delete files, please place the write protection in off status.

1: Place the camera in off status.

2: At the end of the camera, there is a rubber cover for

SD card; open this cover you will see the SD card slot.

3: Insert the memory card as shown in the sketch.

4: Close the SD rubber cover.

● To take out the memory card, slightly press the edge of the memory

card, then release, the card will be ejected out.

When operating this camera for the first time, remember to format the memory card. By doing so, all the data already saved on the

card will be deleted. Prior to formatting, please backup any important files.

1: Turn on the video camera, set the camera to setting menu.

2: Press [up] or [down] key to choose [format], then enter the sub-menu for this function.

3: Press [up] or [down] key to choose [yes] then press [OK] key to format.

Setting the language

Before the first use of this video camera, you must select a language.

1: Turn on the camera, set the camera to setting menu.

2: Press [up] or [down] key to choose [language], then enter the sub-menu for this function.

3: Press [up] or [down] key to choose the language you want, then press [OK] key to confirm.

4: Finally press [menu] key to escape the setting interface.

Table of Contents