Advertisement
Quick Start Guide:‐
1. Connect the power adapter to the power socket of the TV.
2. Connect the antenna cable to the RF connection of the TV.
3. Put the batteries in the remote control.
4. Press the power button on the remote or on the side of the TV.
5. Follow the start‐up wizard and it will automatically tune all the available analogue
and digital channels for you.
If the start‐up wizard doesn't come up and if you just get "Please scan channels" message the
follow the steps below:
1. Press the Menu button
2. Press the down arrow to go to Manual Scan menu
3. Press right arrow to highlight county region and select your region
4. Scroll down to Channels and Press OK
5. Select Auto Scan and press OK button
6. Auto Scan will tune all the available channels for you and your TV will be ready to use.
Advertisement
