Nstalling The Ap Over The Niversal Onnector; Nstalling The Ptional Peaker Icrophone Or Eadset - Kenwood NEXEDGE NX-200 Instruction Manual

i
nStAlling the
1 If you are not using an
optional speaker/ microphone
or headset, install the cap
over the universal connector.
2 Secure the cap in place using
the attached screw.
i
nStAlling the
1 Insert the guide of the
speaker/ microphone or
headset connector into
the groove of the universal
connector.
2 Secure the connector in place
using the attached screw.
Note: When not using an optional
speaker/ microphone or headset,
install the cap over the universal
connector.
c
Ap over the
(o ) S
ptionAl
u c
niverSAl
/ m
peAker icrophone or
onnector
Universal
connector cap
h
eAdSet
Optional
speaker/ microphone
9