Kenwood NEXEDGE NX-200 Instruction Manual page 31

■ Receiving Group Calls (Digital)
When you receive a group call on a Conventional channel
and the received group ID matches the ID set up on your
transceiver, you can hear the caller's voice.
When you receive a group call on a Trunking channel, the
transceiver automatically switches to the communications
channel to receive the call.
• Readjust the volume as necessary.
■ Receiving Individual Calls (Digital)
When you receive an individual call on a Conventional
channel, a ringing tone will sound and the display will show
the caller's ID. To respond to the call, press and hold the
PTT switch and speak into the transceiver as you would
during a normal transmission.
When you receive an individual call on a Trunking channel,
a ringing tone will sound and the the caller's ID will appear
on the display. After receiving the call, you can respond
to the call by pressing and holding the PTT switch and
speaking into the transceiver as you would during a normal
transmission.
22