Advertisement
Quick Links
!
CAU TI ON
WARNING
Nickel Metal Hydride Battery
Regular charge 8 hours / Maximum 12.0 hours
Do not use non-rechargeable batteries. Only use the rechargeable
NIMH battery and power supply/charger provided by Ken-A-Vision.
Replacement Power supply - catalog no. VFPS1209300R (110v)
VFPS230R-2 (230v)
Replacement Battery - catalog no. SCBATBU2
Do Not put battery pack in fire or mutilate, battery may burst or
release toxic materials that may cause burns!
WARRANTY: TEN YEAR WARRANTY AGAINST DEFECTIVE PARTS AND WORK-
MANSHIP. EXCLUDES BULB AND BATTERY.
Ken-A-Vision has quality technicians on staff to repair or service your micro-
scope. Contact us at 1.816.353.4787 for more details.
Ken-A-Vision reserves the right to make design improvements and other changes in accordance
with the latest technology. There is no obligation to make changes in products already man-
ufactured. Patents Pending.©2002 Ken-A-Vision Corporation.
K
-A-V
M
EN
ISION
5615 Raytown Road, Kansas City, MO 64133 U.S.A Tel. 816-353-4787 Fax. 816-358-
5072 Email: info@ken-a-vision.com www.ken-a-vision.com
C
., I
.
ANUFACTURING
O
NC
kav.instcman.cordless.pc.v2
Part# INS-SC50C
10x Widefield
Eyepiece
Spring
Loaded Clips
Stage
Cordless PrepScope
Cordless PrepScope
Supplemental
Instruction Manual
360° Rotating Head
Objective Lens
4x, 10x, 40x
Coarse & Fine
Focus
Light Source
T-1201C
T-1202C
Advertisement
Related Manuals for Ken A Vision PrepScope T-1201C
Summary of Contents for Ken A Vision PrepScope T-1201C
- Page 1 CAU TI ON 10x Widefield WARNING Eyepiece Nickel Metal Hydride Battery Regular charge 8 hours / Maximum 12.0 hours 360° Rotating Head Do not use non-rechargeable batteries. Only use the rechargeable NIMH battery and power supply/charger provided by Ken-A-Vision. Replacement Power supply - catalog no. VFPS1209300R (110v) VFPS230R-2 (230v) Replacement Battery - catalog no.
- Page 2 INSTRUCTIONS FOR CHARGING YOUR KEN-A-VISION ENVIRONMENTAL CONDITIONS CORDLESS MICROSCOPE This equipment is designed to be safe at least under the following conditions: 1. Plug in the round pin adapter from the power supply to the back of · indoor use; your microscope.
- Page 3 dissipation and shorten the life of the bulb. Use two fingers and pull the bulb out touching the metal part of the bulb. Clean the bulb surface with alcohol and lens paper if the user has touched the bulb surface accidental- ly.
-
Page 4: Specifications
PREPSCOPE be very close to the slide, but not touching. OPERATION APPLICATION Built-In Illuminator (model T-1201 and T-1202) Thank you for purchasing your Ken-A-Vision microscope. We designed this compact microscope with optical quality and to withstand student Turn off the power switch, located on the side of the microscope, use.