Runco DHD Series Owner's Operating Manual page 14

DHD Controller Description
5. LIGHT BUTTON
Press this to illuminate the buttons.
6. MENU BUTTON
Pressing this button will access the menu. Press this button during the display of
any sub-menu to return to the previous menu.
7. VIDEO BUTTON
Selects the VIDEO (composite video) input.
8. COMP BUTTON
Selects the Component SD (480i/576i) input.
9. DIRECT ACCESS BUTTONS
The red buttons to the right hand-side of the remote will allow direct access to an
aspect ratio, or selection of a number in certain cases. These buttons are:
ANA - selects Anamorphic aspect ratio
LETBOX - selects Letterbox aspect ratio
4x3 - selects Standard 4:3 aspect ratio
V-WIDE - selects VirtualWide aspect ratio
10. S-VID 1 and S-VID 2 BUTTONS
Selects either S-Video 1 or S-Video 2 inputs.
11. HD1 and HD2 BUTTONS
Selects either HD1 or HD2 inputs. These inputs automatically detect YPbPr
(Component) or RGBHV. Auto detect component input, YPbPr or RGBHV.
12. DVI 1 and DVI 2 BUTTONS
Selects either DVI1 or DVI2 inputs.
14