Runco DHD Series Owner's Operating Manual page 12

DHD Controller Description
9. S-VIDEO 1 INPUT
This is the input for S-video #1 from sources such as Satellite receivers, S-VHS VCR's
and DVD players.
10. S-VIDEO 2 INPUT
This is the input for S-video #2 from sources such as Satellite receivers, S-VHS VCR's
and DVD players.
11. TRIGGERS 1/2/3 (Outputs)
Connection for 3 different 12V trigger controlled devices.
12. RS-232 OUT (RJ-11 Connector)
Comlink connection to the projector.
NOTE: This must be connected for the system to operate.
13. IR
Wired input from an external remote control.
14. RS-232 CONTROL
Connection for an external RS-232 controller device to place the DHD under system
automation control. (See page 24)
15. POWER INPUT (100-230V)
Plug in main power here.
16. MAINS FUSE
This is the main AC input fuse. (Main Fuse: 5mm x 20mm, 500mA, 250V, Slow
Blow)
17. MAIN POWER SWITCH
Disconnects or applies main power to the processor.
12