Register Your Cellular Phone (Pairing); Setting Automatic Connection - Rosen Multimedia Navigation System Owner's Manual

• The factory default setting is "1234".
2. Enter your desired 4-digit PIN number, and then touch the [OK] key.

• Setting Automatic Connection

The system automatically reconnects the cellular phone after the connection is lost or the system is
restarted.
• The factory default setting is "OFF". Touch the [ ] or [ ] key of the
Connection item to set the function ON or OFF.
• Selecting Microphone
You can select the microphone to be used.
• The factory default setting is "Internal". Touch the [ ] or [ ] key of the Microphone
Select item to set the function External or Internal.
• Setting Microphone Gain
You can adjust the input level of the microphone in 16 levels.
• The factory default setting is "8".
•Touch the level indicator button of the Microphone Gain item to adjust the input level.
Note:
• The input level of the microphone can be affected by its surroundings. Adjust the level if the
person on the other end of the telephone has a reception problem.

Register your cellular phone (Pairing)

You can register up to 5 cellular phones. The registering method is as same as "Registering your
Bluetooth audio player"
1. Turn on the power of the cellular phone you wish to register.
2. Touch the [ ] key to display the Device Select screen.
Add
3. Touch the [ ] key to display the Inquiring Device screen.
4. Touch your desired Cellular key to select the key for the cellular phone to be registered.
• You cannot select the Cellular key of which another cellular phone is already registered. Select
a blank Cellular key.
5. If entering the Pass Key code is prompted on your cellular phone, enter the Pass Key code set in
this unit.
When the pairing operation completes, the registered cellular phone is set as the current telephone,
Automatic