2012 Jeep
Grand Cherokee SRT8
®
SPECIFICATIONS
All dimensions are in inches (millimeters) unless otherwise noted. All dimensions are measured at curb weight
with standard tires and wheels.
Note: Information shown is correct at time of publication, and is subject to change without notice.
GENERAL INFORMATION
Body Style
Construction
Assembly Plant
EPA Vehicle Class
Introduction
®
ENGINE: 6.4-LITER HEMI
Availability
Type and Description
Displacement, cu. in. (cu. cm.)
Bore x Stroke
Valve System
Fuel Injection
Construction
Compression Ratio
Power (est.) (SAE J2723)
Torque (est.) (SAE J2723)
Max. Engine Speed
Fuel Requirement
Oil Capacity, qt. (L)
Coolant Capacity, qt. (L)
Factory Oil Fill
Emission Controls
EPA Fuel Economy mpg
(City/Hwy)
Assembly Plant
(a) Meets Federal Tier 2, Bin 5 emissions requirements; marketed in California as an LEV II (Low Emission Vehicle)
under cleanest vehicle rules.
+
JEEP
GRAND CHEROKEE SRT8
®
®
Four-door sport-utility vehicle
Steel uniframe
Jefferson Avenue North Assembly Plant, Detroit, Mich.
Multi-purpose vehicle
Summer 2011 as a 2012 model
V-8 WITH FUEL SAVER TECHNOLOGY
Standard
90-degree V-type, liquid-cooled
392 (6,424)
4.09 x 3.72 (103.9 x 94.5)
Pushrod-operated overhead valves, 16 valves with sodium-filled exhaust valves
and hollow stem intake valves, 16 conventional hydraulic lifters, all with roller tips
Sequential, multi-port, electronic, returnless; automatic features Fuel Saver
mode
Deep-skirt cast-iron block with cross-bolted main bearing caps, aluminum alloy
heads with hemispherical combustion chambers
10.9:1
465 hp (347 kW) at 6,000 rpm
465 lb.-ft. (630 N•m) at 4,200 rpm
6,400 rpm (electronically limited)
Premium 91 octane (R+M)/2 — recommended
7 (6.6)
14 (13.25)
5W-40 Synthetic
Dual close-coupled three-way catalytic converters, quad-heated oxygen sensors
and internal engine features(a)
12/18 (est.)
Saltillo Engine Plant, Saltillo, Mexico
SPECIFICATIONS
1