Manual Seat Adjustment - Jeep grand cherokee User Manual

Memory Seat
• Place the ignition switch in the ON/RUN position, select Remote Linked to Memory in
the Electronic Vehicle Information Center (EVIC) and enter Yes.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key
Fob.
• Refer to the Owner's Manual on the DVD for further details.

Manual Seat Adjustment

Forward/Rearward
GETTING STARTED
• The memory seat feature allows you to
save two different driver seating positions
(excluding lumbar position), driver's
outside mirror, tilt/telescoping steering
column position, and radio station preset
settings. The memory seat buttons are
located on the driver's door panel.
• Adjust all memory profile settings, press
the SET button then press 1 or 2 within
five seconds.
• To program a Key Fob to the memory
position, place the ignition switch in the
LOCK position and remove the Key Fob,
press and release the LOCK button on
the Key Fob to be programmed within
5 seconds of pressing button 1 or 2.
• Lift up on the adjusting bar located at
the front of the seat near the floor and
release when seat is in desired position.
17