Jeep Grand Cherokee Owner's Manual page 296

294 UNDERSTANDING YOUR INSTRUMENT PANEL
• ACC Cancelled — To disable the ACC system. Refer to
"Adaptive Cruise Control (ACC)" in "Understanding
The Features Of Your Vehicle" (if equipped).
• Sensed Vehicle Indicator — The system detects a
slower moving vehicle in the same lane. Refer to
"Adaptive Cruise Control (ACC)" in "Understanding
The Features Of Your Vehicle" (if equipped).
• Driver Override — If you apply the accelerator after
setting the desired speed in the ACC system. Refer to
"Adaptive Cruise Control (ACC)" in "Understanding
The Features Of Your Vehicle" (if equipped).
• Distance Set — After changing the desired following
distance in the ACC system, this message will display
momentarily. Refer to "Adaptive Cruise Control
(ACC)" in "Understanding The Features Of Your
Vehicle" (if equipped).
• Brake — If the ACC system predicts that its maximum
braking level is not sufficient to maintain the set
distance, this message will flash and a chime will
sound while ACC continues to apply its maximum
braking capacity. When this occurs, you should imme-
diately apply the brakes as needed to maintain a safe
distance from the vehicle ahead. Refer to "Adaptive
Cruise Control (ACC)" in "Understanding The Fea-
tures Of Your Vehicle" (if equipped).
• Clean Radar Sensor in the Front of Vehicle — If the
ACC system deactivates due to performance limiting
conditions. Refer to "Adaptive Cruise Control (ACC)"
in "Understanding The Features Of Your Vehicle" (if
equipped).
• ACC/FCW Unavailable Vehicle System Error — If the
ACC system turns off due to a temporary malfunction
that limits functionality. Refer to "Adaptive Cruise
Control (ACC)" in "Understanding The Features Of
Your Vehicle" (if equipped).