Tire Terminology And Definitions - Jeep Grand Cherokee Owner's Manual

446 STARTING AND OPERATING

Tire Terminology And Definitions

Term
B-Pillar
Cold Tire Inflation Pressure
Maximum Inflation Pressure
Recommended Cold Tire Inflation
Pressure
Tire Placard
The vehicle B-Pillar is the structural member of the body located
behind the front door.
Cold tire inflation pressure is defined as the tire pressure after the
vehicle has not been driven for at least 3 hours, or driven less
than 1 mile (1.6 km) after sitting for a three hour period. Inflation
pressure is measured in units of PSI (pounds per square inch) or
kPa (kilopascals).
The maximum inflation pressure is the maximum permissible cold
tire inflation pressure for this tire. The maximum inflation pres-
sure is molded into the sidewall.
Vehicle manufacturer's recommended cold tire inflation pressure
as shown on the tire placard.
A paper label permanently attached to the vehicle describing the
vehicle's loading capacity, the original equipment tire sizes and
the recommended cold tire inflation pressures.
Definition