Jeep Patriot User Manual page 70

WHAT TO DO IN EMERGENCIES
4. Place the shift lever in PARK (automatic transmission) or REVERSE
(manual transmission).
5. Turn OFF the ignition.
Jacking Instructions
NOTE: There are front and rear jacking locations on each side of the body.
The front locations are outlined by two triangular cutouts, the rear
locations by two rectangular cutouts.
68
Block both the front and rear of the
wheel diagonally opposite the jacking
position. For example, if changing the
right front tire, block the left rear
wheel.
NOTE: Passengers should not remain
in the vehicle while the vehicle is
being jacked.
NOTE: Refer to "Tires — General
Information" in "Starting And
Operating" in the Owner's Manual on
the DVD for further information about
the spare tire, it's use, and operation.
1. Remove the scissors jack and lug
wrench from the spare wheel as
an assembly. Turn the jack screw
to the left to loosen the lug
wrench and remove the wrench
from the jack assembly.
2. Loosen, but do not remove, the
wheel nuts by turning them to
the left one turn while the wheel
is still on the ground.