Pattern Selector Dial; Stitch Length Dial; Selecting Stitch Length; Selecting Stretch Stitch Patterns - Janome 712T Instruction Book

•

Pattern Selector Dial

Setting mark
NOTE: Do not turn the pattern selector dial while needle is in
material.
Pattern
Stitch length
1 ~ 4
dial
Stretch stitch
patterns
Stitch length
dial
Turn the handwheel with
your hand until the tip of
needle is out of fabric.
Select the stitch by turning
the pattern selector dial.
0.3 0.5
1 ~ 3
~ 2
~ 4
S. S.
•

Stitch Length Dial

Selecting Stitch Length

*

Selecting Stretch Stitch Patterns

*
q
2 ~ 3
The higher the number, the longer
the stitch length.
You can select the suitable stitch
length for most fabrics.
When sewing stretch stitch, set the
length dial at "S.S.".
w
If forward and reverse feeds become
unbalanced due to the type of fabric,
correct the balance as follows:
When patterns are compressed,
correct it by turning the dial in the
q
direction so that the setting mark
indicates "S.S." to "+" .
When patterns are drawn out,
correct it by turning the dial in the
w
direction so that the setting mark
indicates "S.S." to "–".
13