Charge Your Headset; Turning Your Headset On And Off - Jabra BT3010 User Manual

The Jabra BT3010 is easy to operate. The answer/end button on the headset
performs different functions depending on how long you press it.
Instruction:
Tap
Press
Press and hold

5. Charge your headset

Make sure that your headset is fully charged for 2 hours before you start
using it. Use the AC power supply to charge from a power socket. When the
light indicator (LED) has a solid LED light, your headset is charging. When
the solid LED light turns off, it is fully charged. (See fig 3)
fig 3
Use only the charger provided in the box - do not user chargers from any
other devices as this may damage your headset.
Please note: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.

6. Turning your headset on and off

• Press the answer/end button until you see a burst of flashes on the
indicator light (LED) to turn on your headset.
• Press and hold the answer/end button until you see a burst of flashes
on the indicator light (LED) to turn the headset off.
Please note that the LED indicator light turns off after 1 minute to save
battery. Headset is still active, and light will flash again after tap on the

Duration of press
Press briefly
Approx: 1 second
Approx: 5 seconds