*If you wish to utilize FireWire ports and your computer does not support such interfaces you may be required to purchase an interface as an optional device. You may also utilize your Host (Computer) FireWire 400 port to connect to the FireWire 800 port on BLAZER 700 via an optional standard cable or a small adaptor.
When using FireWire, connect one end of the FireWire cable to the appropriate FireWire port (FW800 or FW400) of your computer and then the other end to the FireWire port in the Blazer 700. When using USB, connect one end of the USB cable to the USB USB 3.0 or (2.0) port of your computer (or via Power Hub that is connected to your computer) and then the other...
Need help?
Do you have a question about the BLAZER 700 and is the answer not in the manual?
Questions and answers