Adjusting The Time Control Dial - iRobot Verro 300 Owner's Manual

Adjusting the Time Control Dial

The time control dial determines how long iRobot Verro travels in one direction
before stopping and reversing direction. Adjust it so that Verro goes from the
waterline on one side of the pool to the waterline on the other side at the
widest point, waiting approximately two seconds on each side.
Turning the time control dial clockwise lengthens the time between Verro
reversing direction; turning the time control dial counter-clockwise shortens
the time.
Once the time control dial has been set to your satisfaction, it will not need
to be adjusted unless you use a different type of filter bag. If Verro starts to
consistently not reach the waterline, or starts moving more slowly, try cleaning
the filter bag.
1
iRobot Verro Owner's Manual