Cleaning System/Cleaning Cycles - iRobot Scooba 200 Series Owner's Manual

Cleaning System
Scooba has an automatic three-part cleaning system that:
Washes – Scooba lays down fresh cleaning solution.
1
Scrubs – Scooba gently scrubs the floor.
2
Dries – Scooba uses a squeegee and
3
vacuum to pick up the dirty water.
Scooba uses only clean water and solution while
washing your floor. The dirty water is stored in a separate tank and is never reused.
CauTIOn:
• Do NOT use bleach, ammonia or alcohol in Scooba. These liquids may damage the robot and will void the warranty.
• Do NOT use hot water as it may damage the robot.
• Scooba contains electronic parts. Do NOT submerge Scooba in water. Clean with a damp cloth only.
• Do not use Scooba on unfinished or unsealed wood or laminate flooring, which can be damaged by wet
cleaning methods.
• Always consult your floor manufacturer for approved cleaning methods.
Scooba has two cleaning cycles.
Cleaning Cycle Room Size
Full Up to 150 sq. ft.
Short Up to 60 sq. ft.
Always completely fill Scooba for best performance. Upon completion of a short cycle, Scooba will
have water remaining in the Fill tank and can complete a second short cycle if desired. Be sure to
empty and rinse both tanks before storing for future use.
8 irobot Scooba 200 Series Owner's Manual
Approx. Cycle Time How to Start
45 minutes Press Power On
Press Clean and release
when song starts
20 minutes Press Power On
Press and hold Clean
until second song starts
1
2
3
When should I use this cycle?
For larger rooms or any room
that needs extra cleaning time
To clean multiple small areas on
a single battery charge