Advertisement
COMPACT DISC MODULE
5. REPEAT SWITCH
Press this switch to repeat only one track on the disc. The display screen will indicate "RPT".
- Press this switch again to cancel the repeat play.
6. PLAY/PAUSE SWITCH
Press the play/pause switch to play the disc. The disc will play at the first track number.
- Press again to stop playback and the pause indication LED on.
7. LCD DISPLAY
The "LOAD PLAY" indicator will appear, track number and play time (minute/second) are
displayed in the digital display.
8. TRACK SELECTION SWITCH
If you wish to search for a particular track, push the Track Up/Down switch ("
the desired track number is indicated on the digital display.
- Forward Mode
1. Press the Track Up (
) switch once.
The display counter indicator will display the next track number.
The unit will search the beginning of the next selection, and start to play it.
2. To search for a selection further ahead, press this switch until the desired track number is
indicated on the display counter.
- Reverse Mode
1. Press the Track Down (
) switch once.
The beginning of the track being played is searched for.
2. To search for a track further back, push the switch until the desired track number is indicated
on the display counter.
9. MANUAL MUSIC SEARCH SWITCH
Press the Manual Music Search Switch ("
distance to the desired position on a track during disc play.
10. EJECT SWITCH
Press the Eject Switch to remove the disc, and it will come out automatically.
NOTE: Press the Play/Pause switch on track the disc in to the insert slot instantly.
11. CD VOLUME, ON/OFF SWITCH
You can adjust the volume level of Compact Disc Player or the power ON/OFF of CD.
4
PAM-CDA
,
") until
,
") to rapidly advance or retrace a short
NOTE: RESET SWITCH
Use this Reset Switch for the following reasons:
- Initial installation of the unit when all wiring is completed.
- When CD disc does not work properly and does not accept the disc.
- CD disc is accepted but numeric indication is erratic or time readout is constantly
reset.
Everytime the reset switch is activated, disc programming will be erased, thus
requiring reprogramming of the unit.
COMPACT DISC MODULE
5
PAM-CDA
Advertisement
