Inter-m PAM-CDM Operation Manual
Inter-m PAM-CDM Operation Manual

Inter-m PAM-CDM Operation Manual

Compact disc module

Advertisement

Quick Links

Operation Manual

Compact Disc Module
PAM-CDM

Advertisement

Table of Contents
loading

Summary of Contents for Inter-m PAM-CDM

  • Page 1: Operation Manual

    Operation Manual Compact Disc Module PAM-CDM...
  • Page 2 A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
  • Page 3: Table Of Contents

    COMPACT DISC MODULE Contents Contents Unpacking ............................2 Installation Environment............................2 Important Safety Instructions .......................2 Features ...............................3 Operation ............................3 Front Panel ............................4 Connections ............................7 Block Diagrams ..........................8 Specifications .............................9 Service Procedures............................10 Schematic ............................10 Parts List ............................10 Variations and Options ........................10 Warranty ............................10 PAM-CDM...
  • Page 4: Unpacking

    S3125A S3125A PAM-CDM...
  • Page 5: Features

    Keep volume levels turned down before switching on. NOTE: The system’s operation is delayed by approximately three seconds after pressing the power switch. This is due to the built-in protection circuitry, designed to protect the speakers and other system components. PAM-CDM...
  • Page 6: Front Panel

    Press the Music Scan switch to scan the selections. The digital display will indicate "SCAN" and the track number display indicates the next number. The unit advances to the beginning of the next selection, and starts to play the selection for 10 PAM-CDM...
  • Page 7 1. Press the Track Down ( << ) switch once. The beginning of the track being played is searched for. 2. To search for a track further back, push the switch until the desired track number is indicated on the display counter. PAM-CDM...
  • Page 8 When CD disc does not work properly and does not accept the disc. CD disc is accepted but numeric is erratic or time readout is constantly reset. Everytime the reset switch is activated, disc programming will be erased, thus requiring reprogramming of the unit. PAM-CDM...
  • Page 9: Connections

    COMPACT DISC MODULE Connections Connections PAM-CDM...
  • Page 10: Block Diagrams

    COMPACT DISC MODULE Block Diagram Block Diagram PAM-CDM...
  • Page 11: Specifications

    COMPACT DISC MODULE Specifications Specifications PAM-CDM ELECTRICAL Output voltage 1Volt (volume max) Signal to Noise Ratio >75dB T.H.D <0.8% Frequency Response < 1.5dB (20Hz-20kHz) Mechanism Life Time 3000H(over) GENERAL Weight 1.5 kg/3.3lb Dimensions 184(W) x 55(H) x 180(D)mm/7.2(W) x 2.2(H) x 7.1(D)in * Specifications and design subject to change without notice.
  • Page 12: Procedures

    To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region.
  • Page 13 NOTE...
  • Page 14 NOTE...
  • Page 16 Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).

Table of Contents