Table of Contents
Advertisement
2) Click on the icon "Remove the hardware safely" on the system bar to stop the data card.
3）Remove the data card
FQA & Answers
If you have the following problems when using the data card, you can try the following
resolutions. If the problem still exists, please contact the data card's technical support.
Why the PROLINK HSDPA Modem PC Manager always displays "Can not find
port..."
1) The data card isn't inserted properly, please reinsert the data card again.
2) The data card driver is not installed or has problems, please check the Windows "Device
Manager", reinsert the data card or reinstall the driver, restart Windows if necessary.
3) On some version Vista system, you may need to turn off the "User Account
Control(UAC)"
Account"/"Enable/Disable User Account Control" and turn off the function.
4) On some system, you may need to reinstall the drivers after changing the USB port.
Why the PROLINK HSDPA Modem PC Manager displays "No USIM Card"
1) the USIM card isn't inserted properly, such as inserted reverse, please insert the USIM card
correctly again.
2) the USIM card was corrupted or unsupported.
Why the PROLINK HSDPA Modem PC Manager displays "No Service"
1) There's no GSM or WCDMA network coverage or the signal is poor, please change to a
place there's good network coverage or use the USB cord.
2) Sometimes the data card need more time to acquire the network, eg. the network coverage
is complex, please wait a little longer.
function.
Please
select
the
Windows
18
"Control
Panel"/"User
Advertisement
Table of Contents
