Rockford Fosgate OEQ2 HIGH Installation & Operation Manual page 17

Frequency Warp Control
The Frequency Warp controls are used to fine adjust the center frequency of
the Boost/Cut controls. Each Warp control allows for a range of 1/2 octave
above and below the center frequency. The following graph illustrates the
operating range of the 1kHz Warp control at its minus (–), center (•), and plus
(+) positions.
• Graph Illustrates Frequency Warp of 1kHz adjusted to Minus, Center,
and Plus
Minus
+
0
–
(750Hz)
Center
+
0
0
–
–
(1kHz)
– 14 –
Plus
+
(1.5kHz)