Oeq 2 Operation - Rockford Fosgate OEQ2 HIGH Installation & Operation Manual

OEQ O
2
Boost/Cut Control
The Boost/Cut controls are used to increase or reduce emphasis in a specific
octave of music. Each control provides up to 12dB of boost or cut to the
selected frequency. The following graph shows the effect of each control at
the full boost (+12dB) and full cut (–12dB) positions.
Maximum
+12
0
–12
+12dB
d
Center
+12
0
B
r
–12
+0dB
Minimum
+12
0
–12
–12dB
• Graph Illustrates each Boost/Cut control adjusted to –12dB,
0dB, and +12dB
PERATION
Hz
– 13 –