Table of Contents
Advertisement
10.
Input Sensitivity Controls – The input level controls are preset for 500mV which will match the output
of most source units. They can be adjusted to match input levels ranging from 300mV to 5V.
11.
Internal Crossovers – These built-in crossover cards are configurable for a multitude of operating
frequencies. The orientation of the card in its socket determines its function of high-pass, low-pass or full
range operation.
12.
E-Z Bridge Switch / 0 -180 Phase Switch – This dual purpose switch enables you to E-Z bridge the
amplifier or invert the signal phase of the right channel.
13.
Phase Switch – This switch enables you to easily invert the phase of the left channel without having to
disconnect the speaker wires.
14.
Crossover Switching – These internal switches allow the crossover to be distributed to the amplifier and
Pass-Thru in many different configurations.
15.
Audiophile Bypass – One of the crossover switching configurations allows the internal crossover circuit
to be bypassed, maintaining Audiophile sound quality due to a shorter signal path.
16.
LED Power Indicator – The LED gives a visual indication of the status of the amplifier, lighting when the
unit is turned on.
17.
Punch Status Display – The RJ11 interface allows connection of an LED display used to monitor amplifier
performance.
– 6 –
Hide quick links:
Advertisement
Table of Contents
