Advertisement
Mac OS X (v10.4 and above) installation instructions
1. Plug mouse into the USB port of your Mac.
2. Download the Driver Installer from
www.razersupport.com
3. Run the installer.
4. The Razer DeathAdder introduction screen appears. Click CONTINUE.
5. Important information regarding the Razer DeathAdder driver is shown. Click CONTINUE after reading.
6. Read the software license agreement and click CONTINUE.
7. A confirmation popup screen will appear. Click AGREE if you accept all terms of the agreement.
8. If you want to choose the destination folder where the driver software will reside, click CHANGE
INSTALL LOCATION. Otherwise, click INSTALL to begin installation.
9. At the end of the installation, follow the instructions onscreen to restart your computer. Click RESTART.
CONNECTING YOUR RAZER DEATHADDER™
1. Plug mouse into USB port and turn on system.
2. Download the driver Installer at www.razersupport.com
3. Run the installer program.
4. Follow the onscreen instructions.
Registering your Razer DeathAdder
Please visit
www.razerzone.com/registration/
for online product registration.
What you'll get:
• 2 years limited manufacturer's warranty
• Free online technical support at www.razersupport.com.
Advertisement
