QSC KLA12 Quick Start Manual page 2

Attaching KLA12 Loudspeakers Together
WARNRNG!: A single KLA array can consist of a maximum of two KLA181, or five KLA12, or two KLA181 and five KLA12
loudspeakers. The weight of any single array shall not exceed 480 lbs. (218 kg).
1. Make sure that the levers labeled "B" are up, and slides
1
2
2. Place one KLA12 on top a KLA12. Nest the four feet
surfaces are aligned and parallel. For more than a two-box KLA12 assembly, please see the KLA12 User Manual.
B
3. On the bottom loudspeaker, push button "A". Slide
WARNRNG!: Make sure the loudspeakers are properly aligned.
WARNRNG!: Make sure the lever locks in the down, locked position. Lift array to confirm assembly.
— Figure 1 —
(1) are down on both sides of the bottom loudspeaker
— Figure 2 —
(1) on the top unit into the feet receptacles
PUSH "A"
1
— Figure 3 —
(1) automatically moves to
.
1
Parallel
(2) on the bottom unit
ROTATE DOWN
SLIDES UP
Up Position. Rotate lever "B" down to
2
(Figure 1).
Parallel
(Figure 2). Make sure the
Locked Position.