Wi-Fi - HTC Desire VC User Manual

146 Internet connections
Adding a new access point
Have the access point name and settings from your mobile operator ready
(including username and password if required).
1. Slide the Notifications panel open, and then tap
2. Tap Mobile network, and then choose which network to configure.
3. Tap Access Point Names.
4. Tap > New APN.
5. Tap each item you want to edit and enter the APN settings.
6. When you're done, tap

Wi-Fi

To use Wi-Fi, you need access to a wireless access point or "hotspot".
The availability and strength of a Wi-Fi signal varies depending on objects the Wi-Fi
signal has to pass through (such as buildings or a wall between rooms).
Turning Wi-Fi on and connecting to a wireless network
1. Slide the Notifications panel open, and then tap
2. Tap the Wi-Fi On/Off switch to turn Wi-Fi on.
3. Tap Wi-Fi.
Detected Wi-Fi networks will be listed.
If the wireless network that you want is not listed, tap
add it.
4. Tap the Wi-Fi network you want to connect to.
If you selected a secured network, you'll be asked to enter the network key or
password.
5. Tap Connect.
When HTC Desire VC is connected to the wireless network, the Wi-Fi icon
in the status bar and tells you the approximate signal strength.
The next time HTC Desire VC connects to a previously accessed secured wireless
network, you won't be asked to enter the key or other security information again,
unless you reset HTC Desire VC to its factory default settings.
> Save.
.
.
> Add network to manually
appears