Table of Contents
Advertisement
STORAGE
2.
Connect the drain hose to the drain
joint of the vapor separator and set
the other end of the hose toward
the outside of the engine undercase.
Place an approved gasoline
container below the fuel drain
outlet, and use a funnel to avoid
spilling fuel.
3.
Tilt up the outboard motor.
Gasoline is highly
flammable and explosive.
You can be burned or
seriously injured when
handling fuel.
Stop the engine and keep
heat, sparks, and flame
away.
Handle fuel only
outdoors.
Wipe up spills
immediately.
88
4.
Loosen the vapor separator drain
screw and drain the vapor
separator.
5.
After draining thoroughly, tighten
the drain screw securely.
6.
Install the drain hose to the
silencer case.
7.
Drain the fuel tank into an
approved gasoline container or, if
you need to store fuel in the fuel
tank, you can extend fuel storage
life by filling the fuel tank with
fresh gasoline and adding a fuel
stabilizer that is formulated for
that purpose.
If using the portable fuel tank
(optional equipment), firmly close
the fuel tank vent knob.
Engine Oil
1.
Change the engine oil and the oil
filter (p.
70
72
).
2.
Remove the spark plugs (p.
and remove the emergency stop
switch clip from the emergency
stop switch.
3.
Pour 1 2 teaspoons (5
(p.
102
) of clean engine oil into
each cylinder.
4.
Rotate the engine a few
revolutions to distribute the oil in
the cylinders.
5.
Reinstall the spark plugs (p.
74
),
3
10 cm )
75
).
Hide quick links:
Advertisement
Table of Contents
