OPERATION
EMERGENCY STARTING
If the recoil starter is not working properly, the engine can be started with
the spare starter rope in the tool kit.
1. Remove the engine cover.
2. Follow steps 1 through 4 of the normal engine starting procedure (see
pages 26 and 27).
3. Wind the spare rope clockwise around the pulley, and then pull it
straight out to start the engine. Keep clear of moving parts.
4. Leave the recoil starter off and carefully reinstall engine cover.
Exposed moving parts can cause injury.
Use extreme
care when installing
the
engine cover. Do not operate the
outboard motor without the engine cover.
STARTER
ROPE
.-.
:
30