HoMedics Shiatsu+ MCS-400H Instruction Manual And Warranty page 9

NOTE: The moving
dual massage
mechanism always
"parks" or finishes in
its lowest position.
It will continue to
this position after
the power has been
turned off. If the
electrical supply is
interrupted, when
power is restored, the
mechanism will "park"
or move to its lowest
position.
Spot Shiatsu
While the unit is in Shiatsu massage, press either button to
stop and focus the Shiatsu action in one place. Once the unit
is operating in Spot Shiatsu, you may adjust the mechanism
position by holding down either button until the desired position
is reached. The Up Arrow will move the mechanism upwards
and the Down Arrow will move it down. Once you release the
button, the mechanism will stop in that place.
Power Button
To turn on the massage functions, first press the POWER button.
The L.E.D. indicator will illuminate and confirm your selection.
To turn off the massage functions, simply press the button
again. The L.E.D. indicator will blink while the dual massage
mechanism returns to its lowest point and then it will turn off.
Extended Track Shiatsu
Massaging Cushion
Moving Massage Mechanism
Shiatsu Massage
Shiatsu is a deep kneading
circular massage.
Shiatsu Programs
Choose from 3 preset
programs where the Shiatsu
massage travels up and down
in a specific area of the back.
To select a program, simply
press the button and the L.E.D.
will illuminate. To deselect,
press the button again or press
another button.
8
+
CON