On-Screen Menus Selection - HANNspree SL22D Manual

On-Screen Menus Selection

Follow the instructions indicated on the left side of the OSD Function Menu.
• Press P /P
• Press VOL + on the control panel or the u arrow key to enter a correspond submenu.
VOL +/VOL - on the control panel or the t/u arrow keys to adjust the desired
• Press
setting.
• Press MENU on the control panel repeatedly or Exit to exit the OSD menu.
Video
Option
Picture mode
Brightness
Contrast
Saturation
Sharpness
Color temperature
Advanced video
Active Contrast
Backlight Mode
E-Sticker
Video Preset
Note: The options available on the OSD may vary depending on the input signal
source.
16
on the control panel or p/q arrow keys to scroll through the menus.
Description
Select a preset view option optimized for different viewing
conditions (Standard/Mild/Dynamic/User).
Adjust the base level of the signal in the picture (0~100).
Adjust the gradient of the video signal (0~100).
Adjust the color intensity (0~100).
Adjust the sharpness or softness of the display (0~20).
Select the color temperature in the display
(Normal/Warm/Cool).
DNR
MPEG NR
Enable/Disable the Active Contrast feature (On/Off).
Automatic adjust the backlight mode setting based on your
current location (Home Mode/Shop Mode).
* This option will only appear when Active Contrast is set
to Off.
Enable/Disable the E-Sticker function. E-Sticker is used
by dealers to display the TV banner or featured logo
on screen at an interval of 8 seconds for promotional
purposes (Off/On).
* This option will only appear when Active Contrast is set
to Off.
Reset all Video settings to the factory default settings (OK/
Cancel).
Reduce the noise level
(Strong/Auto/Off/Low/Medium).
Reduce the light level
(Strong/Auto/Off/Low/Medium).