Selecting Your Content Source; Performing An Automatic Channel Search; Selecting Channels - HANNspree SL22D Manual

7
Press OK when initial setup is
completed.
n I t i l a i S e u t p
Congratulations !!
Completed Initial Setup.
Please press [OK] to exit the wizard.
Back

Selecting Your Content Source

You can watch cable or broadcast TV, play DVD or connect to your
PC.
To select the source signal:
• Press INPUT on the remote control. The Input Source menu
appears.
p/q to highlight the desired source, then press OK to
• Press
confirm.

Performing an Automatic Channel Search

Before using the TV to view programs, you need to activate the channel search first.
1
Press MENU on the control panel or the remote control to enter the TV menu.
2
Select Channels > Channel Scan > Country.
3
Select your country and press OK.
4
Select the signal type.
5
Press OK/u on the remote control to run the channel search.

Selecting Channels

• Press P or P
/ decrease the program number.
• Press the numeric buttons on the remote control.
C o m p e l e t
on the control panel or P p or P q on the remote control to increase
Source
TV
AV
Component
SCART
VGA
HDMI
USB
13