Compass - Honda Accord Sedan Owner's Manual

EX-L and EX-L V6 without navigation
system
Compass Operation
Compass operation can be affected
by driving near power lines or
stations, across bridges, through
tunnels, over railroad crossings, past
large vehicles, or driving near large
objects that can cause a magnetic
disturbance. It can also be affected
by accessories such as antennas and
roof racks that are mounted by
magnets.
When you turn the ignition switch to
the ON (II) position, the compass is
self-calibrating, then the compass
display is shown in the display.
Compass Calibration

COMPASS

U.S. model is shown.
The compass may need to be
manually calibrated after exposure to
a strong magnetic field. If the
compass seems to be continually
showing the wrong direction and is
not self-calibrating, or the compass
display is blinking with the CAL
indicator on, do the following.
2011 Accord Sedan
Compass
COMPASS SETTING MENU ITEMS
NOTE: Do this procedure in an open
area, away from buildings, power
lines, and other vehicles.
1. Turn the ignition switch to the ON
(II) position.
2. Press and hold the MENU button
for about 5 seconds until you hear
a beep. The display shows you the
compass setting menu items.
CONTINUED
259