Honda Accord Sedan Owner's Manual page 200

The skip (seek)
SKIP (SEEK)
function searches up and down from
the current frequency to find a
station with a strong signal. To
activate it, press either side (
) of the SKIP bar, then release
it. You can also activate the skip
function (SEEK is displayed on the
screen) by pushing the interface
selector to the right or left.
Playing the FM/AM Radio (Models with navigation system)
SCAN INDICATOR
or
SCAN The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN side of
the SCAN/A.SEL bar, then release it.
To scan with the interface dial, push
the selector down, and then push it
to the right. You will see SCAN
flashing on the screen.
2011 Accord Sedan
When the system finds a strong
signal, it will stop and play that
station for about 10 seconds. If you
do nothing, the system will then scan
for the next strong station and play it
for 10 seconds. When it plays a
station that you want to listen to,
press the scan side of the bar again,
or push the interface selector to the
right again.
Preset Each preset button or
preset icon can store one frequency
on AM and two frequencies on FM.
To store a preset memory location:
Select the desired band, AM or
1.
FM. FM1 and FM2 let you store
two sets of FM frequencies with
the preset buttons (on-screen
icons).
CONTINUED
197