Table of Contents
Advertisement
Entering a Destination from the
DEST Screen (while en route)
If you say "Menu", or press the DEST/
ROUTE button and select the "Dest.
MENU 1" or "Dest. MENU 2" tab,
the system displays the DEST screen.
Follow the procedure described in
Entering a Destination, which begins
on page 28 .
When the Calculate route to screen is
displayed, select OK and push in on the
Interface Dial.
When the pop-up menu is displayed,
select New Dest. to set your location
as a replacement destination, or
Waypoint to set as a waypoint.
The system will return to the map
screen and recalculate the route to your
specifi ed new destination or waypoint.
Continue Trip to Screen
If you restart the vehicle without having
completed your prior trip, you will see
the following screen:
• To continue to your destination or
other waypoints, say or select OK.
• To cancel your destination, press
the CANCEL button or the BACK
button on the steering wheel, or
using the voice control system, say
"Cancel" or "Back."
• If you wish to change the routing
method, select Route Pref. by using
the Interface Dial.
• For additional information on
changing the routing method, see
Changing the Routing Method on
page 53 .
Driving to Your Destination
AcuraLink Messages
AcuraLink enhances your ownership
experience by providing a direct
communication link between you
and Acura. AcuraLink messages are
displayed on the navigation screen.
®
Working through XM
Satellite Radio,
AcuraLink works in conjunction with
your vehicle's navigation, Bluetooth
®
HandsFreeLink
(HFL), and audio
systems to send and receive several
kinds of message. These include:
• Operating tips and information on
your vehicle's features.
• Important recall and safety
information.
• Maintenance information to keep
your vehicle in top condition.
• Diagnostic information to provide
information about any problems with
your vehicle.
• Planned appointments with your
Acura dealer.
Navigation System
®
81
Advertisement
Table of Contents
