Changing The Route; Dest Screen (Route) - Honda 2012 TL Navigation Manual

Driving to Your Destination
When you say or select Avoid, the
display returns to the list screen. When
you move the Interface Dial down
on the list screen to select Reroute,
the system recalculates a detour route
avoiding the road.
You can choose to avoid up to 10 traffi c
incidents.
NOTE:
• When you select the "All" tab, Avoid
is not displayed.
• To activate this function, you need to
set Traffi c Rerouting to ON in the
Routing & Guidance settings (see
page 112 ).
• Because the criterion for whether
the traffi c event is to be detoured or
not is included in the traffi c event
data itself, the traffi c rerouting is not
performed for all the traffi c incidents
ahead on the route.
• Even when the route recalculation is
performed for a traffi c event, if the
system cannot fi nd any detour route
or a quicker detour route, the event
location is not always avoided.
• Traffi c rerouting is available only if
you have a current traffi c/weather
subscription with XM. See page 126 .
76
Navigation System

Changing the Route

While en route, you may wish to alter
your route, add an interim "Waypoint"
(pit stop), choose a different destination,
or cancel your current destination. To
change your present route, you can do
any of the following:
Say "Menu," or press the DEST/
ROUTE button to view the DEST
screen (Route):
• Cancel Route (page 77 )
• Detour (page 77 )
• Avoid Streets (page 77 )
• Change Route Preference (page 77 )
• Waypoint (page 77 )
• Destination List (page 77 )
Choose a different destination (other
methods) by:
• Saying, "Find nearest..." to fi nd a POI
(page 79 ).
• Saying, "Go home" (page 79 ).
• Using the Interface Dial to select a
different POI or address on the map
(page 80 ).
• Pressing the DEST/ROUTE button
and selecting the "Dest. MENU 1 or
2" tab on the DEST screen (page 81 ).

DEST Screen (Route)

Pressing the DEST/ROUTE button
displays the DEST screen (Route):
NOTE:
The "Route" tab can be selected only
when you are en route.