System Initialization; Entering The Security Code; Acquiring Gps Information - Honda CR-V Navigation Manual

2013
Hide thumbs Also See for CR-V:
Table of Contents

Advertisement

System Initialization

The navigation system must be initialized if
power to the navigation system is
interrupted for any reason (e.g., the
battery was disconnected).

Entering the Security Code

Find the navigation system's security code
and serial number label in your Owner's
Manual kit. Do not store the label in your
vehicle. If you lose the label, you must first
retrieve the serial number, and then obtain
the code. You can find out about your
serial number and security code from a
dealer.
186
1. Turn the ignition switch to ON (II), and
turn on the audio system.
If you turn the ignition switch to
ACCESSORY (I), and you will
requested to enter the security code.
See step 3.
2. Press and hold the VOL 9 (Volume/
Power) button for more than two
seconds.
The system is reactivated when the
system's control unit recognizes that
the system is in your vehicle.
If the control unit fails to recognize,
"ENTER CODE" appears on the
navigation screen.
3. Enter the security code.
If you do not enter the security code
correctly after 10 tries, leave the
system for one hour before trying
again, or visit a dealer to have the
system reset.
NOTE:
In the U.S., you can register the security
code on Owner Link (owners.honda.com.).
To find information on how to retrieve the
serial number and obtain the code, visit
radio-navicode.honda.com.

Acquiring GPS Information

Depending on the length of time the
power was interrupted, your system may
require GPS initialization.
If initialization is not necessary, the system
proceeds directly to the Startup
Confirmation screen.
If the system fails to locate a sufficient
number of satellites to locate your position
within 10 minutes, the following screen is
displayed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

CrvCr-v 20132013 cr-v navigation system

Table of Contents