Hitachi LE39S406 Owner's Manual page 24

Connections to other equipment
To connect the TV to a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords are
required.
Rear and Right of the unit
To PC/DVI AUDIO IN
NOTE:
• When using HDMI1/DVI IN to connect your HDMI or DVI devices, you must select the corresponding audio input source
(HDMI or DVI) on the menu screen (see page 15). Otherwise you will only see the image with no sound.
To connect the TV to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC'S RESOLUTION AND REFRESH
RATE 60 HZ .
Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA connector PC MONITOR
IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio
cord to the audio output of your Multimedia computer and to the AUDIO IN connector of the PC/DVI AUDIO IN jack of the TV. You can
also connect the PC with HDMI cable. If you use HDMI cable, you don't have to connect the audio cord. If you use DVI-to-HDMI cable,
please connect audio cord as same way as VGA cable.
Press INPUT on the remote control to select PC mode.
Switch on the computer. The TV can operate as the computer monitor.
Rear and Right of the unit
To
PC/DVI
AUDIO
IN
To PC
MONITOR
IN
NOTE:
• The on-screen displays will have a different appearance in PC mode than in TV mode.
• If there is no video signal from the PC when the unit is in PC mode, "No signal" will appear on the TV-screen.
• LE39S406/LE39H316: When the PC connected to the HDMI terminal and 1920x1080 resolution (FHD) is selected, the top and
bottom, right and left edges of the picture may be hidden on all aspect. In this case, use the PC MONITOR IN jack (VGA cable) is
recommended to connect.
• LE39S406/LE39H316: When the PC's resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal,
which has been confirmed operational on this TV, may appear depending on the PC used. In this case, "Auto Adjust" or other position
adjustment functions may fail to correct the image position. To solve this problem, change the PC settings to select another resolution.
EN 24
J3PC1421A_EN.indd 24
HDMI cable (type A connector)
To HDMI IN
Audio cord (not supplied)
To HDMI IN
HDMI cable (not supplied)
VGA cable (not supplied)
Audio cord (not supplied)
To HDMI output
(not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
To DVI output
Monitor Display modes
Mode Resolution
VGA 640x480
VGA 720x400
SVGA 800x600
XGA 1024x768
WXGA 1280x768
WXGA 1280x720
WXGA 1360x768
*SXGA 1280x1024 60Hz
*WXGA+ 1440x900
*FHD 1920x1080 60Hz
* LE39S406/LE39H316 only
To return to normal mode
Press INPUT again.
(continued)
HDMI device
or
DVI device
Refresh rate
60/ 72/ 75 Hz
70Hz
56/ 60/ 72/ 75 Hz
60/ 70/ 75 Hz
60Hz
60Hz
60Hz
60Hz
8/24/12 4:50:23 PM