LED LCD TV User Manual LE32ECD05AU LE32HECD05AU Thank you for purchasing this HITACHI product. To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference.
Contents Welcome General Safety Instructions Assembly Controls and Connections Getting Started Basic Operations EPG (Electronic Programme Guide) Recording (PVR function) The On-Screen Display (OSD) Menu Menu Options in TV Mode Menu Options in PC Mode Media (USB) Mode Built-in DVD Player Operations Cleaning and Maintenance FAQs...
General Safety Instructions refer ce correc CAUTION c ’ CAUTION! reve e Ref Danger! V rec e Electrical safety and cord handling Befor corr CAUTION e cor over e or co er or o c rf ce Pro ec re .
General Safety Instructions (Cont.) When not in use, disconnect the power cord from the outlet. Grasp the plug, not the cord, when disconnecting the unit. Pulling the cord can damage the internal wires and may cause a fire. Never touch the TV screen, antenna or cord during thunderstorms. Stop use during thunderstorms;...
General Safety Instructions (Cont.) Ensuring the TV is not overhanging the edge of the supporting furniture. Not placing the TV on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a suitable support. Not standing the TV on cloth or other materials placed between the TV and supporting furniture.
Assembly Assembling the stand Contents of carton: 1 x Instruction manual 1 x LED LCD TV 1 x Stand base 1 x Warranty card 1 x Remote control 4 x KA4*12 Screws (for stand) 2 x AAA batteries Step 1: Place a soft, cushioned surface to prevent damaging the LED LCD screen.
Assembly (Cont.) Wall-mounting This television set is equipped with holes on the back panel for use with wall- mounting brackets (not included). Please use the image below as a reference when buying wall-mounting brackets. NOTE: The distance between the holes is 200 x 100mm in width and heigh For wall-mounting, remove all five screws to remove the entire stand assembly.
Controls and Connections Main unit controls Disc slot Power supply: Ensure your mains voltage and frequency correspond with those on the TV rating label. General control buttons For the DVD player 1. Power/Stand-by button ( 8. Play / Pause button ( 2.
Controls and Connections (Cont.) Sockets (rear and side panel) 1. Composite audio & video input sockets (L/R/VIDEO) 3. USB port (MEDIA) 4. Coaxial output socket (COAXIAL OUT) 5. Component video input sockets (Y Pb/Cb Pr/Cr) 6. PC audio input socket (PC AUDIO) 7.
Controls and Connections (Cont.) Connections AV Connection Component (YPbPr) USB Connection...
Controls and Connections (Cont.) Remote control The buttons on the remote control and similarly marked ones on the main unit perform similar functions.
Controls and Connections (Cont.) TV control buttons 1 Power/Stand-by button ( 2 TV/Radio select button / DVD eject button (TV/RADIO/ ) 3 Mute button (MUTE 4 Number buttons (0-9) 5 Channel return button (LAST CH ) 6 Audio language select button (AUDIO) Language select button (LANGUAGE) 7 Channel select buttons ( CH ) 8 Input source select button (SOURCE)
Controls and Connections (Cont.) DVD and media buttons In DVD mode, use the buttons below for the following actions: ANGLE Press to display the current playback angle; press again to toggle between different playback angle codes in sequence. NOTE: Selectable playback angle is only available if the DVD has this feature.
Controls and Connections (Cont.) Teletext function Teletext or Austext is no longer available, nor is there any plan for a replacement teletext service in Australia. For more information, please visit the websites of the Australian channel providers. However, one teletext option, “closed captions”, is still working on most Australian television channels.
Getting Started Using the remote control Inserting batteries Remove the battery cover on the back of the remote control by gently pushing down the cover lock and pulling the cover upwards. Insert two AAA alkaline or equivalent batteries, following the +/- marking in the battery compartment.
Getting Started (Cont.) First time installation Connect the antenna to the RF 75Ω socket. Turn on the TV. The First Time Installation menu will be displayed on the screen, as below. Press / on the remote control to select the desired tuning type: DTV - digital channels (SD/HD) ATV - analogue channels only ATV + DTV - all channels available in your area...
Basic Operations Make sure all necessary connections are correctly made before connecting the unit to the wall socket and turning on the power. The power indicator turns red and the unit is in stand-by mode. Power on/off Press on the remote control (or on the side of the TV) to turn on the power to the TV.
Basic Operations (Cont.) Input source Make sure you have the external input device (such as a home theatre) properly connected. Turn on the external device and press [SOURCE] on the TV remote control to select it. The input source menu appears. 1.
EPG (Electronic Programme Guide) EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers information about the programmes to be broadcast. You can access it in digital mode by pressing the EPG button on the remote control. Press the EPG button to display the EPG interface (above).
EPG (Electronic Programme Guide) (Cont.) Record Press the RED button to display the recorder 24 ABC News 24 menu (right). Press to select an item to Start Time change. Press OK to add the programme to the reminder list. An updated reminder list will be shown.
Recording (PVR function) Your television features a PVR recording function which lets you: remote). IMPORTANT: For any type of recording with this television, you must have a USB device inserted into the appropriate USB port to record on. We recommend using a hard disk with self-contained power. Instant one-touch recording and playback In DTV mode and with a USB device properly inserted, press the recording button on the remote control to activate the PVR function for instant recording of the...
Recording (PVR function) (Cont.) menu by pressing / to select an item and / to change the setting. For example, if the programme starts at 8:30pm on the same day, enter: 30 in the space for MINUTES, 20 in the space for HOURS (a 24 hour clock applies), and then the relevant date.
Recording (PVR function) (Cont.) To format a compatible device using the TV, perform the following steps: 1. Press MENU, then press five times so that ‘SETUP’ is displayed at the left of the window. 2. Press four times so that ‘PVR file system’...
The On-Screen Display (OSD) Menu Navigating through menus Press the [MENU] button for the OSD main menu to appear. Press for the main menu to display sequentially: Channel Picture Sound Time Lock Setup … Menu options displayed in grey are not available in that mode. Common operation procedures For each main menu, press or [OK] to enter its sub-menu.
Menu Options in TV Mode Channel menu Press [MENU] to display the main menu. Press / to select Channel in the main Auto Tuning ATV ManualT uning DTV ManualT uning menu, then press or [OK] to enter. Programme Edit CHANNEL Signal Information Auto tuning Press or [OK] to start searching channels...
Menu Options in TV Mode (Cont.) Picture menu Press [MENU] to display the main menu. Press / to select Picture in the main menu, then press or [OK] to enter. Picture mode Press / or [OK] to enter the Picture Mode sub-menu.
Menu Options in TV Mode (Cont.) Sound menu Press [MENU] to display the main menu. Press / to select Sound in the main menu, then press or [OK] to enter. Sound mode Press / or [OK] to enter the Sound Mode sub-menu.
Menu Options in TV Mode (Cont.) Time menu Press [MENU] to display the main menu. Press / to select Time in the main menu, then press or [OK] to enter. Clock (DTV only) Display the current system time. NOTE: You cannot change the time manually in DTV mode, as the time comes directly from a signal source.
Menu Options in TV Mode (Cont.) Lock menu Press [MENU] to display the main menu. Press / to select Lock in the main menu, then press or [OK] to enter. Lock system This allows you to turn the system lock on or off.
Menu Options in TV Mode (Cont.) Key lock Press / or [OK] to set the key lock to On or Off. Set to On, the keys on the side panel of the TV set are locked and cannot operate the TV set. You can only operate the TV with the remote control.
Menu Options in TV Mode (Cont.) PVR File system (DTV only) Insert your USB device (FAT32 format only) into the USB port. Press or [OK] to enter the sub-menu, where you can check the USB device connected for recording. Press / to select “Check PVR File System”, then press [OK] to start checking.
Menu Options in PC Mode Make sure you have your computer properly connected to the TV and turned on. Press [SOURCE] on the TV remote control and select PC from the input source menu. The available menus will be displayed on the screen.
Media (USB) Mode Plug in a USB device (with FAT32 format), then press [SOURCE] to set the input source to Media. Press / to select Media in the source menu, then press [OK] or to enter. Press / This TV supports the following media formats: Photo: JPEG Text: Music: MP3...
Media (USB) Mode (Cont.) Media - Music Press / to select Music, then press Press / to select the file you want [OK] to enter. to listen to. When highlighting the option you select, the file information will appear on the right and the song will be played automatically.
Media (USB) Mode (Cont.) Media - Movie Press / to select Movie, then press [OK] to enter. Press [DISPLAY] to show the function panel on the bottom of the screen. The basic operations within the movie menu are the same as for those in the Music menu (previous page). Media - Text Press / to select Text, then press Press / to select the file you want to...
Built-in DVD Player Operations Some points about discs The following types of disc can be played on this unit: Region number The region number (Regional Restriction Code) is built into this unit. This unit can play region number 4 DVD video discs. DVD video discs DVD video discs are divided into titles, and the titles are subdivided into chapters.
Built-in DVD Player Operations (Cont.) CAUTION: Only the types of disc mentioned on the previous page can be played on this unit; DVD-ROM, CD-ROM, CVD, VCD etc. cannot be played back. A DVD-RW (video mode) can generally be played back, but not necessarily all DVDs of this type: playback capability depends on the recording conditions.
Built-in DVD Player Operations (Cont.) Language Setup OSD: Set the OSD language. Menu: Select the disc menu language. Audio: Select the audio language. Subtitle: Select the subtitle language. Screen Setup TV Type: Set the TV display mode. Screen Saver: Set the screen saver. TV System: Select PAL, AUTO or NTSC.
Built-in DVD Player Operations (Cont.) Basic playback functions If this symbol appears on the TV screen during operation, the function you are trying to access is currently not available on the disc. 1. Turn on the TV and press [SOURCE] to select the input source as DVD. 2.
Built-in DVD Player Operations (Cont.) Title search [DVD] Press [GOTO], then press the number buttons to enter the desired title number. Repeat playback Press [REPEAT] during playback to activate repeat mode: If you want to ... Press [REPEAT] ... If you want to ... Press [REPEAT] ... Repeat current track Once Repeat chapter Once...
Built-in DVD Player Operations (Cont.) Subtitle language [DVD] If the DVD you are watching has subtitles, press [SUBTITLE] repeatedly during playback until the desired subtitle language appears on the TV screen. Example: SUBTITLE 01/03 ENG NOTE: Not all discs support this function. Audio soundtrack language (multilanguage) [DVD] This function works only with discs that have multiple audio soundtrack languages recorded.
Cleaning and Maintenance WARNING! For your personal safety, be sure to disconnect the power cord before proceeding with any maintenance or cleaning. Cleaning the TV panel Do not touch the TV panel with sharp objects. Use a clean, soft cloth to wipe off any dust and fingerprints from the TV panel surface.
FAQs Problem Possible cause Possible solution No picture and The power cord is not Plug the power cord into a sound. plugged in. suitable outlet. The wrong input source is Select the correct input source. selected. The input source has failed Make sure the input source is to connect with the TV.
Model LE32HECD05AU LE32ECD05AU Display type LED-LCD LED-LCD Screen size 80cm (31.5”) 80cm (31.5”) Aspect ratio 16:9 16:9 Panel resolution (pixel) 1366 (horizontal) 1920 (horizontal) x 768 (vertical) x 1080 (vertical) Contrast ratio 3000:1 6000:1 Response time HD compatible 480i, 480P, 576i, 576P, 720P,...
Memo Model LE19ECD05AU LE22ECD05AU LE24ECD05AU Display type LED-LCD LED-LCD LED-LCD Screen size 47cm (18.5”) 54cm (21.5”) 60cm (23.6”) Aspect ratio 16:9 16:9 16:9 Panel resolution 1366 (horizontal) 1920 (horizontal) 1920 (horizontal) (pixel) x 768 (vertical) x 1080 (vertical) x 1080 (vertical) Contrast ratio 1000:1 1000:1...