Power Connection; Back Panel Cable Connections - Goldmund EIDOS 36U User Manual

NOTE NOTE NOTE NOTE
In all system and specially in HDMI
wiring, to guarantee the HD signal
throughout the full system, Goldmund
recommends to perform all the wiring
when all units are turn off and
successively turn on the
according to the following combination:
screen, acoustic processor
preamplifier and finally the player.
NOTE NOTE NOTE NOTE
The Eidos 36U+ uses the HDCP stands for
High-bandwidth Digital Content Protection
in HDMI connection. To prevent copying of
digital audio and video content as it travels
across connections
HDCP encrypt the digital audio and video
content. The TV must support HDCP in
order to decrypt and properly display the
content.
5 5 5 5

POWER CONNECTION

POWER CONNECTION POWER CONNECTION POWER CONNECTION
Plug the AC power cord to the back of the Eidos 36U+ and in a wall socket.
Switch the back power switch to "ON". The front display will light up as soon as
you will press "OPEN" button on the front panel or when pressing the remote
control "POWER" button, indicating that the unit is powered on.
Unplug the power cord if you are not going to use the player for an extended period
of time. Hold the power plug when unplugging. Do not pull on the cord.
6 6 6 6

BACK PANEL CABLE CONNECTIONS

BACK PANEL CABLE CONNECTIONS BACK PANEL CABLE CONNECTIONS BACK PANEL CABLE CONNECTIONS
6.1 VIDEO CONNECTIONS
The Eidos 36U+ offers 2 different types of video signal output:
units
There are two HDMI output connectors; we recommend using the HDMI 1 for
or
video and HDMI 2 for audio. This configuration is required to offer the best video
quality.
• HDMI VIDEO OUTPUT
• DIGITAL VIDEO OUTPUT
GOLDMUND EIDOS 36U+ – Universal Player -
8