Goldmund EIDOS REFERENCE BLUE User Manual page 9

Hide thumbs Also See for EIDOS REFERENCE BLUE:

Table of Contents

Enlarged version

BACK PANEL CABLE CONNECTIONS

(Ctd.)

6.2

AUDIO CONNECTIONS

Connecting to a Receiver/Amplifier with HDMI

Connecting to

Input/Output

HDMI can transmit both audio and video signals over a single cable. If you have an

HDMI-capable receiver that can support HDMI audio, you can simply run an HDMI

cable from the player to your receiver and enable HDMI audio on the receiver (see

your receiver's owners' manual for more information). The receiver usually has an

HDMI output that you can connect to your TV or projector to pass the video signal.

This player has been set up, as recommended by Goldmund, to have HDMI and

Digital outputs in LPCM format.

In case you would need to restore the Goldmund factory setup of you player, follow

this sequence on the Setup Menu of the Eidos 20BD:

Setup > Audio Format Setup > HDMI Audio

PCM connection:

PCM connection: Connecting to a Receiver/Amplifier in

PCM connection:

PCM or Digital 7.1/5.1 multichannel

Goldmund recommends that the greatest care is taken when selecting the cable

linking the player to the D/A converter or the preamplifier. The very accurate

signal provided by the Eidos 20BD can easily be ruined by an imperfect

connection. Use a "Goldmund Lineal" cable from the coaxial output if you want

to achieve the most accurate jitter-free connection for CD playback.

Setup > Audio Format Setup > Coaxial/Optical Output

a Receiver/Amplifier with HDMI

Connecting to a Receiver/Amplifier in

GOLDMUND EIDOS REFERENCE BLUE – Blu-Ray Player - 10

LPCM

BITSTREAM

Table of Contents