Goldmund EIDOS REFERENCE BLUE User Manual page 10

Hide thumbs Also See for EIDOS REFERENCE BLUE:

Table of Contents

Enlarged version

6 6 6 6

BACK PANEL CABLE CONNECTIONS

(Ctd.)

Connecting to a Receiver/Amplifier with 7.1ch/5.1ch

Audio Input

Please use 8 interconnect cables to connect the FRONT-L (Front Left), FRONT-R

(Front Right), SURR-L (Surround Left), SURR-R (Surround Right), Center, SUB

(SubWoofer), REAR-L (Surround Back Left) and REAR-R (Surround Back Right),

analog output terminals of the Eidos Reference Blue to the corresponding multi-

channel analog audio input jacks of your A/V receiver or amplifier. If the A/V receiver

or amplifier only has 5.1ch audio input, the REAR-L (Surround Back Left) and

REAR-R (Surround Back Right) terminals do not need to be connected.

Goldmund recommends that the greatest care is taken when selecting the cable

linking the player to the D/A converter or the preamplifier. The very accurate

signal provided by the Eidos Reference Blue can easily be ruined by an imperfect

connection. Use a "Goldmund Lineal" cable from the coaxial output if you want

to achieve the most accurate jitter-free connection for CD playback

Connecting to a Stereo Audio System

If your audio system only offers stereo audio inputs, or if you would like to connect a

dedicated stereo system in addition to the surround system, you can connect it to

the LEFT-STEREO-RIGHT audio output terminals of the player.

NOTE

The STEREO AUDIO OUT terminals will always provide a down-mixed stereo signal

from multi-channel sources. The "Down Mix" and other speaker settings in the Audio

Processing Setup Menu do not affect the STEREO AUDIO OUT.

GOLDMUND EIDOS REFERENCE BLUE – Blu-Ray Player - 11

Table of Contents