Goldmund EIDOS REFERENCE BLUE User Manual page 14

special "Source Direct" output resolution on its HDMI output. This resolution is
recommended for use with external video processors or high-end TVs.
7 SETTING UP THE DISPLAY SYSTEM
(Ctd.)
In "Source Direct" mode, the player works as a "transport". It decodes video from the
discs and then sends the raw video signal in its native resolution and format, without
extra processing, to the external video processor or TV.
Depending on your selection of "Primary Video Output", the available output
resolution selections will differ. For the HDMI output, the following output resolutions
are available: Auto, 1080p, 1080i, 720p, 480p/576p, 480i/576i, and Source Direct. If
signal resolution that the TV can display. For the component output, the following
output resolutions are available: 1080i, 720p, 480p/576p and 480i/576i. Please refer
to the specification of your TV to find the best resolution to use.
Press the UP/DOWN ARROW buttons to select the desired output resolution, then
press the ENTER button. The player will apply the selected output resolution and
ask you to confirm the selection. If your TV supports the selected resolution, you will
see a "OK" option and press the ENTER button to save the resolution setting. If your
TV does not support the selected resolution, you may see a black screen or an error
message. In this case please wait for 15 seconds and the Easy Setup screen will
reappear. Select a different resolution that your TV can support.
GOLDMUND EIDOS REFERENCE BLUE – Blu-Ray Player - 15