Goldmund SRCD3 User Manual page 8

3 OPERATING UP THE SRCD3
3.1 FRONT PANEL CONTROLS
Front Panel Keys
- OPEN : Located near the disc drawer opening, this button opens the tray to
load the CD or SACD. The same button closes the tray when it is
open. When loading a disc, place discs in the disc tray with the label
side facing up.
- PLAY : This key is used to start or resume Playback. It also cancels the
"Pause" function.
- PAUSE: Key used for the pause function. When the "Pause" function is
switched off by pressing the "Start" key, the selection will start back
at the exact location where it was interrupted.
- STOP : Press to stop playback. Pressing once enables playback to resume
from a point shortly before the location where it stopped. Pressing
twice causes the disc to return to the beginning of the disc if playback
starts again.
- >> : Press to advance to chapters/tracks. Press and hold to perform
fast-forward scanning.
- << : Press to go back to previous chapters/tracks. Press and hold to
perform reverse playback scanning.
These functions, accessible from the keyboard can also be achieved by the
remote-control transmitter.
User manual – Goldmund SRCD3 CD/SACD Player
P7